AutoCAD Electrical Toolset Included with Official AutoCAD.
Rios Enriquez. A short summary of this paper. PDF Pack. People also downloaded these PDFs. People also downloaded these free PDFs.
Introduction to AutoCAD Download Download PDF. All rights reserved. To get the permissions, contact at cadcamcaeworks gmail. Publisher does not assume, and expressly disclaims, any obligation to obtain and include information other than autodesk autocad electrical 2016 tutorial pdf free provided to it by the manufacturer.
The reader is expressly warned to consider and adopt all safety precautions that might be indicated by посетить страницу источник activities herein and to avoid all potential hazards.
By following the instructions contained herein, the reader willingly assumes all risks in connection with such instructions.
The Autodesk autocad electrical 2016 tutorial pdf free makes no representation or warranties of any kind, including but not limited to, нажмите для продолжения warranties of fitness for a particular purpose or merchantability, nor are any such representations implied with respect to the material set forth herein, and the publisher takes жмите сюда responsibility with respect to such material. The main features of this program are: Training as per your need Highly experienced Engineers and Technician conduct the classes on the software applications used in the industries.
The methodology adopted to teach the software is totally practical based, so that the learner can adapt to the design and development industries in almost no time. The efforts are to make the training process cost effective and time saving продолжение здесь you have the comfort of your time and place, thereby relieving you from the hassles of traveling to training centers or rearranging your time table.
Game Designing: Unity. We also provide consultant services for Design and development on the above mentioned software packages For more information you can mail us at: cadcamcaeworks gmail. Easy-to-use CAD-embedded electrical schematic and panel designing enable autodesk autocad electrical 2016 tutorial pdf free designers and engineers to design most complex electrical schematics and panels.
You can quickly and easily employ engineering techniques to optimize performance while you design, to cut down on costly prototypes, eliminate rework and delays, and save you time and development costs. Following the same strategy as for the previous edition, the book is written to help professionals as well as learners in performing various tedious jobs in Electrical control designing. The book follows a step by step methodology. The book covers use of right tool at right places.
The book starts with basics of Electrical Designing, goes through all the Electrical controls related tools and ends up with practical examples of electrical schematic and panel designing. Chapter on Reports makes you comfortable in creating and editing electrical component reports.
This edition also discusses the interoperability between Autodesk Inventor and AutoCAD Electrical which is need of industry these days. Some of the salient features of this book are : In-Depth explanation of concepts Every new topic of this book starts with the explanation of the basic concepts.
Topics Covered Every chapter starts with a list of topics being covered in that chapter. Instruction through autodesk autocad electrical 2016 tutorial pdf free The instructions to perform any action are provided by maximum number of illustrations so that the user can perform the actions discussed in the book easily and effectively.
There are about illustrations that make the learning process effective. Tutorial point of view The book explains the concepts through the tutorial to make the understanding of users firm and long lasting. Each chapter of the book has tutorials that are real world projects. Project Free projects and exercises are provided to students for practicing. For Faculty If you are a faculty member, then you can ask for video tutorials on any of the topic, exercise, tutorial, or concept.
Formatting Conventions Used in the Text All the key terms like name of button, tool, drop-down etc. Free Resources Link to нажмите для продолжения resources used in this book are provided to the users via email. To get the resources, mail us at cadcamcaeworks gmail. With your contact record with us, you will be provided latest updates and informations regarding various technologies.
Your valuable constructive suggestions will be incorporated in our books and your name will be addressed in special thanks area of our books. Besides that he is a good person in his real life, helping nature for everyone. With the support of CreateSpace, we assure the best books and support to the education on latest technologies.
Few Words from Author I would like to thank all the educators and students for making the book successful in its aim. My motive while writing the first edition of book was to make it as simple as possible for students. I found some of the reviews on Amazon saying that its a basic book so there I got the satisfaction that it is helpful to newbie. I got lots of e-mails and autodesk autocad electrical 2016 tutorial pdf free from the users of book, and I have tried to incorporate most of the suggestions in this edition.
I would like to thank all the professionals in industries who are здесь the book and I want to assure them that we will keep on microsoft office home and student 2010-setup funktioniert nicht mehr free download the updates of industry in the book in best possible ways. So, it is important to know that why we need electrical drawings and what is the role of AutoCAD Electrical in that.
When we work по ссылке an electrical industry, we need to have a lot of читать далее handy like the wiring of machines, position of switches, load of every machine and so autodesk autocad electrical 2016 tutorial pdf free. It is almost impossible to remember all these details of an industry because there might be thousands of wires and switches and there can be hundreds of machine.
To make this thing possible, we need electrical drawings that are written or printed documentation of these informations. Figure-1 shows an electrical drawing. An electrical drawing can be of a house, industry or an electrical panel. A circuit drawing is derived from a block or functional diagram see Figure It will have details, such as the terminal identification numbers which enable autodesk autocad electrical 2016 tutorial pdf free to wire the unit together.
Parts of the autodesk autocad electrical 2016 tutorial pdf free diagram may simply be shown as blocks with no indication as to the electrical components inside. These are usually sub-assemblies made separately, i. Figure-3 shows a wiring diagram. Wiring diagram Wiring Schedule A wiring schedule defines the wire reference number, type size and number of conductorslength and the amount of insulation stripping required for soldering.
In complex equipment you may also find a table of interconnections which will give the starting and finishing reference points of each connection as well as other important information such as wire color, identification marking and so on. Refer to Figure Wiring Schedule Block Diagram The block diagram is a functional drawing which is used to show and describe the main operating principles of the equipment and is usually drawn before the circuit diagram is started.
It will not give any real detail of the actual wiring connections or even the smaller components and so is only of limited interest to us in the wiring of control panels and equipment. Figure-5 shows a block diagram. Block diagram Parts list Although not a drawing in itself, in fact it may be part of a drawing.
Parts list You know various types of electrical drawings but these drawings contain various symbols. The following section explains the common symbols that are used in an electrical drawing.
Conductors There are 12 types of symbols for conductors; refer to Figure-7 and Figure These symbols are explained next. General symbol, conductor or group of conductors. Temporary connection or jumper. Two conductors, single-line representation.
Two conductors, multi-line representation. Single-line representation of n conductors. Twisted conductors. Twisted pair in this example. Symbols for conductors 7. General symbol denoting a cable.
Example: eight conductor four pair cable. Crossing conductors — no connection. Symbols for conductors Junction of conductors connected. Double junction of conductors. Alternatively used double junction. Connectors and terminals Refer to Figure General symbol, terminal or tag.
These symbols are also used for contacts with moveable links. The open circle is used to represent easily separable contacts and a solid circle is used for those that are bolted.
Connectors symbols Link with two easily separable contacts. Link with two bolted contacts.
Autodesk autocad electrical 2016 tutorial pdf free.Learn AutoCAD with our Free Tutorials
Preface AutoCAD Electrical AutoCAD Electrical, a product of Autodesk, Inc, is one of the world’s leading application designed specifically to create. The bestselling guide to AutoCAD, updated and expanded with new video instructionMastering AutoCAD and AutoCAD LT 2.
– Autodesk autocad electrical 2016 tutorial pdf free
Wire Number Leader drop down The procedure to use the tools in this drop-down is discussed next. You will be prompted to select a wire number; refer to Figure You will be prompted to specify the point for leader end point; refer to Figure You will be prompted to specify the next point of the leader.
The wire number leader will be assigned; refer to Figure Note that you can assign the labels with leaders or without leaders by selecting the Manual button from the respective area. The labels will be attached to the wires; refer to Figure The In-Line Wire Labels tool is used to insert the in-line wire labels.
The labels can include informations like color, gauge, and so on. You will be prompted to specify the insertion point for the symbol. The label will be inserted; refer to Figure The procedure to use all these tools are similar. These procedures are discussed next. Cable Markers This tool is used to insert cable markers. The procedure is given next.
The Insert Component dialog box will be displayed with the cable markers; refer to Figure The cable markers will be inserted automatically. You will be prompted to click on the wire to create the dot tee mark. The dot tee mark will be created; refer to Figure You will be prompted to select the tee of wires. The Circuit Selection dialog box will be displayed as shown in Figure You will be prompted to specify the insertion point of the circuit.
A list of templates will be displayed; refer to Figure A new drawing will open with the selected template; refer to Figure The Enhanced Attribute Editor dialog box will be displayed; refer to Figure You are asked to specify the starting point of the wire bus. The Insert Component dialog box with wire labels will be displayed; refer to Figure Wire Number Leader drop down Figure Note that by default, the tags on wires are displayed in yellow color.
To change the color, double click on the color name in the label. The wire numbers will be assigned to the wires; refer to Figure The list of motors in the catalog will be displayed as shown in Figure- The panel of buttons will be displayed; refer to Figure The symbol will get attached to cursor.
Motor to be placed Figure The motor will be placed; refer to Figure The Insert Component dialog box will be displayed. You are prompted to specify the location of the ground symbol. Now, we are ready to edit the components, wires and circuits for customizing. Edit Components panel Figure Circuit Clipboard panel Figure This tool is used to edit the details of any component inserted in the drawing area.
The options in this dialog box have already been discussed. Some components in electrical system also have jumpers to change their functionality. For example, you might have seen jumpers in transformers to change the output voltage between V and V. The Internal Jumper tool in the Edit Components drop-down is used to edit the functions of internal jumpers.
You are asked to select a component for editing jumpers. The Wire Jumpers dialog box will be displayed; refer to Figure Component selected Figure You are asked to select the jumper points on the component; refer to Figure Note that you can select the terminals directly from the dialog box but in that case you will not be able to identify the wire connections to the jumpers.
The Wire Jumpers dialog box will be displayed with the jumpers selected; refer to Figure Note that the Add button is active now. Jumper points selected Figure The jumper will be connected to the selected terminals and will be listed in the Assigned Jumpers area of the dialog box; refer to Figure The jumper will be displayed connecting all the selected terminals; refer to Figure Jumper connecting the terminals The example use above is just for illustration purpose, in real world we will not be connecting motors like this.
We can use PLCs for applying jumpers but they have not been discussed till so we are using the example of motors. Note that if you fix a component tag then it will not get updated automatically when you re-tag the components in the drawing.
For example, select the Force selected tags to Fixed radio button; then later all the selected tags will get fixed. You are asked to select the master component. The Copy Catalog Assignment dialog box will be displayed; refer to Figure You are asked to select the target component. Some of my friends might get the Update Related Components dialog box; refer to Figure Click on the Yes-Update button if you want to update all similar components in the drawing or choose the Skip button to keep others as they are.
This dialog box comes if you are assigning properties to an incompatible component. For example, if you are coping properties of a motor to a switch then this dialog box will come. If it is need of your drawing to assign such properties then click on the OK button and then Overwrite otherwise cancel it and take your decision.
Update Related Components dialog box Figure The record will be added for the component; refer to Figure The user record will be added to the component. The procedure to do so is given next. You are asked to select the component that you want to copy. You are asked to specify the insertion points of the copied component. The copy will be created with the specified parameters. There are three tools in this drop-down; refer to Figure The procedure to use these tools is discussed next.
You are asked to select a circuit. You are asked to specify the insertion point for the copied circuit. You are asked to specify the second point of insertion; refer to Figure The circuit will be placed.
You are asked to specify the new base point for the circuit. You are asked to specify the insertion point for the circuit. Set the insertion point and the circuit will be placed accordingly. A shortcut menu will be displayed. The Properties-Circuit dialog box will be displayed; refer to Figure The current drawing will be saved as user defined circuit; refer to Figure For example, you can change position of a component on wire, you can align components, and so on.
Various tools in this drop- down are discussed next. Scooting Scooting is the movement of a component, tag, wire number etc. You are asked to select component, wire or wire number from the drawing area. A box will be attached to the cursor representing the component; refer to Figure The reference line will be created from the center of the selected component; refer to Figure Also, you are asked to selected the to be aligned components. The entities will be aligned; refer to Figure Entities after alignment Moving Component You can move components in a circuit without creating gaps in the circuit.
You are asked to select a component. The component will get attached to the cursor; refer to Figure The component will be placed and the circuit will be modified to fill the gap; refer to Figure You are asked to select the component that you want to flip or reverse.
Reverse component We will discuss about the other two tools in the Transform Components drop-down later in the book when we will be discussing PLCs. The Retag Components dialog box will be displayed; refer to Figure The components will be re-tagged according to the selected radio button.
You are asked to select the component. If you select the Update a Block radio button then new block will be placed for selected component. If you select the Library Swap radio button then all the blocks will be updated. The Update Block dialog box will be displayed; refer to Figure Click on the Browse button and select the desired component block. Click on the Project button if you want to update the block for all project drawings or click on the Active Drawing button to update the block in current drawing only.
Click on the Browse button and select the directory of component blocks. These tools are common to all the AutoCAD platform software. An attribute is used to relate the blocks with the real word information.
These tools perform the action as their names suggest. You can also perform all these tasks by using the Properties Manager. The Properties Manager will be displayed with the relative options; refer to Figure Click in the desired field and change the attributes as required. The tools in this drop-down are discussed next.
The Component Cross-Reference dialog box will be displayed; refer to Figure The Cross-Reference Report dialog box will be displayed; refer to Figure You can individually update the cross-references by selecting the Pick button from the dialog box. In this same way, you can use the other tools in the Cross References drop-down. Circuit Clipboard panel The tools in this panel are used to manipulate circuits; refer to Figure Click on the Cut or Copy Clip tool to copy any circuit in the drawing and using the Paste tool, you can paste the copied or cut circuits.
The tools in this panel are discussed next. The Edit Wire Number drop-down will be displayed; refer to Figure You are asked to select a wire or wire number. Note that if the number is existing then you will be prompted to enter a different wire number.
Fix The Fix tool is used to make a wire number fixed. To do so, click on the Fix tool from the Edit Wire Number drop-down. You are asked to select a wire number that you want to be fixed. Select the wire number and it will get fixed. Also, the color of the wire number will change to CYAN color. Swap The Swap tool is used to swap the wire numbers. Click on this tool from the Edit Wire Number drop-down and select two wire numbers one by one.
The wire numbers will be swapped. This tool is used to find and replace the wire numbers in the drawing. Hide and Unhide The Hide tool is used to hide the wire numbers and Unhide tool is used to unhide the wire numbers. Click on the Hide tool and select the wire number that you want to hide. To unhide the wire number, click on the Unhide tool from the Edit Wire Number drop-down.
Select the wire, the hidden wire number for that wire will be displayed. Trim Wire The Trim Wire tool is used to trim a wire connected between wire connections. You are asked to select the wire that is to be trimmed. Also, the wire numbering will be modified accordingly. Note that the remaining wire numbers are not modified on using this tool. To delete the wire numbers, click on this tool and then click on the wire numbers that you want to be deleted.
The selected wire numbers will be deleted. Click on the wire at the desired position. The wire number of that wire will move to the location you clicked on the wire. Add Rung The Add Rung tool is used to add a rung in any circuit or ladder.
A rung is a wire connecting two parallel wiring lines. You are asked to click at the desired location to add rung. A rung will be created connecting both the wires; refer to Figure Ladder Editing drop-down Figure This tool is used to modify the ladder numbering. The ladder numbering will be modified accordingly. Renumber Ladder Reference T he Renumber Ladder Reference tool is used to specify the reference point for the ladder renumbering. The Renumber Ladders dialog box will be displayed; refer to Figure Next, click on the OK button from the dialog box.
To select all click on the Do All button and then click on the OK button from the dialog box. The ladders will be renumbered as per the specified value. Wire Editing drop-down Stretch Wire tool The Stretch Wire tool is used to stretch the end point of a wire to connect it to the next intersecting wire.
You are asked to select the end point of the wire. The wire will stretch till it intersect with the facing wire; refer to Figure You are asked to select the point on first wire from which the bending will start. The wire bend will be created refer to Figure Wire bend after selecting second point Show Wires The Show Wire tool is used to display all the wire in the drawing. The Drawing Audit dialog box will be displayed; refer to Figure The wires will be highlighted; refer to Figure You are asked to select a wire segment.
These tools and their operations are discussed next. If you want to modify the wire type then click on the desired field and specify the desired values. Create or Edit Wire Type dialog box Figure For example, ORNG. For example, 4AWG. The wire type will be created. All the similar wires will be converted to the wire type selected in the dialog box. You are asked to select a wire number.
Wire number after toggling Till this point, we have discussed all the general tools used in editing components, circuits and wires. In the next chapter, we will discuss PLC and its components. It was originally developed to replace mechanical relays, timers, counters. PLCs are used successfully to execute complicated control operations in a plant. Its purpose is to monitor crucial process parameters and adjust process operations accordingly.
A sequence of instructions is programmed by the user to the PLC memory and when the program is executed, the controller operates a system to the correct operating specifications. Memory is used to store different types of information in the binary structure form.
The memory range of S is composed of three main parts as program, parameter, and retentive data fields. It is the responsibility of the product engineering department to plan for manufacture of new or modified products. Other processes might involve the filling and capping of bottles, the printing of newspapers, or the assembly of automobiles etc.
Measurements taken include water temperature, oil temperature, RPMs, torque, exhaust temperature, oil pressure, manifold pressure, and timing. Carburetor Production Testing PLCs provide on-line analysis of automotive carburetors in a production assembly line. The systems significantly reduce the test time, while providing greater yield and better quality carburetors.
Pressure, vacuum, and fuel and air flow are some of the variables tested. Monitoring Automotive Production Machines The system monitors total parts, rejected parts, parts produced, machine cycle time, and machine efficiency. Statistical data is available to the operator anytime or after each shift. Power Steering Valve Assembly and Testing The PLC system controls a machine to ensure proper balance of the valves and to maximize left and right turning ratios.
The PLC monitors bearing temperatures, operation of clearance pockets, compressor speed, power consumption, vibration, discharge temperatures, pressure, and suction flow. They match and blend colors to predetermined values. Chemical Batching The PLC controls the batching ratio of two or more materials in a continuous process. The system determines the rate of discharge of each material and keeps inventory records.
Several batch recipes can be logged and retreived automatically or on command from the operator. Fan Control PLCs control fans based on levels of toxic gases in a chemical production environment. This system effectively removes gases when a preset level of contamination is reached.
Gas Transmission and Distribution Programmable controllers monitor and regulate pressures and flows of gas transmission and distribution systems. Data is gathered and measured in the field and transmitted to the PLC system.
Oil Fields PLCs provide on-site gathering and processing of data pertinent to characteristics such as depth and density of drilling rigs. The PLC controls and monitors the total rig operation and alerts the operator of any possible malfunctions.
The system controls the operation by following the annealing temperature curve during the reheating, annealing, straining, and rapid cooling processes through different heating and cooling zones.
Improvements are made in the ratio of good glass to scrap, reduction in labor cost, and energy utilization. Glass Batching PLCs control the batch weighing system according to stored glass formulas. The system also controls the electromagnetic feeders for in feed to and outfeed from the weigh hoppers, manual shut-off gates, and other equipment.
Cullet Weighing PLCs direct the cullet system by controlling the vibratory cullet feeder, weight-belt scale, and shuttle conveyor. All sequences of operation and inventory of quantities weighed are kept by the PLC for future use.
Batch Transport PLCs control the batch transport system, including reversible belt conveyors, transfer conveyors to the cullet house, holding hoppers, shuttle conveyors, and magnetic separators.
The controller takes action after the discharge from the mixer and transfers the mixed batch to the furnace shuttle, where it is discharged to the full length of the furnace feed hopper. It also monitors piece-count production and machine status. Corrective action can be taken immediately if the PLC detects a failure. Transfer Line Machines PLCs monitor and control all transfer line machining station operations and the interlocking between each station.
The system receives inputs from the operator to check the operating conditions on the line-mounted controls and reports any malfunctions. This arrangement provides greater machine efficiency, higher quality products, and lower scrap levels. The system provides ramping control and synchronization of electric motor drives. The system keeps track of when each tool should be replaced, based on the number of parts it manufactures. It also displays the count and replacements of all the tool groups.
Paint Spraying PLCs control the painting sequences in auto manufacturing. The operator or a host computer enters style and color information and tracks the part through the conveyor until it reaches the spray booth. The controller decodes the part information and then controls the spray guns to paint the part. The spray gun movement is optimized to conserve paint and increase part throughput. The system knows where the hoist is at all times.
Storage and Retrieval Systems A PLC is used to load parts and carry them in totes in the storage and retrieval system. The controller tracks information like a lane numbers, the parts assigned to specific lanes, and the quantity of parts in a particular lane. This PLC arrangement allows rapid changes in the status of parts loaded or unloaded from the system.
The controller also provides inventory printouts and informs the operator of any malfunctions. Conveyor Systems The system controls all of the sequential operations, alarms, and safety logic necessary to load and circulate parts on a main line conveyor. It also sorts products to their correct lanes and can schedule lane sorting to optimize palletizer duty.
Records detailing the ratio of good parts to rejects can be obtained at the end of each shift. Automated Warehousing The PLC controls and optimizes the movement of stacking cranes and provides high turnaround of materials requests in an automated, high-cube, vertical warehouse.
The PLC also controls aisle conveyors and case palletizers to significantly reduce manpower requirements. Inventory control figures are maintained and can be provided on request.
The controller also calculates oxygen requirements, alloy additions, and power requirements. Loading and Unloading of Alloys Through accurate weighing and loading sequences, the system controls and monitors the quantity of coal, iron ore, and limestone to be melted.
It can also control the unloading sequence of the steel to a torpedo car. Continuous Casting PLCs direct the molten steel transport ladle to the continuous- casting machine, where the steel is poured into a water-cooled mold for solidification.
Cold Rolling PLCs control the conversion of semifinished products into finished goods through cold-rolling mills.
The system controls motor speed to obtain correct tension and provide adequate gauging of the rolled material. Aluminum Making Controllers monitor the refining process, in which impurities are removed from bauxite by heat and chemicals. The system grinds and mixes the ore with chemicals and then pumps them into pressure containers, where they are heated, filtered, and combined with more chemicals. In addition, the PLC monitors powerhouse facilities, schedules distribution of energy, and generates distribution reports.
The PLC controls the loads during operation of the plant, as well as the automatic load shedding or restoring during power outages. Energy Management Through the reading of inside and outside temperatures, the PLC controls heating and cooling units in a manufacturing plant. The PLC system controls the loads, cycling them during predetermined cycles and keeping track of how long each should be on or off during the cycle time.
The system provides scheduled reports on the amount of energy used by the heating and cooling units. Coal Fluidization Processing The controller monitors how much energy is generated from a given amount of coal and regulates the coal crushing and mixing with crushed limestone.
Chapter on Reports makes you comfortable in creating and editing electrical component reports. This edition also discusses the interoperability between Autodesk Inventor and AutoCAD Electrical which is need of industry these days.
Some of the salient features of this book are : In-Depth explanation of concepts Every new topic of this book starts with the explanation of the basic concepts.
In this way, the user becomes capable of relating the things with real world. Topics Covered Every chapter starts with a list of topics being covered in that chapter. Instruction through illustration The instructions to perform any action are provided by maximum number of illustrations so that the user can perform the actions discussed in the book easily and effectively.
There are about illustrations that make the learning process effective. Tutorial point of view The book explains the concepts through the tutorial to make the understanding of users firm and long lasting.
Each chapter of the book has tutorials that are real world projects. For Faculty If you are a faculty member, then you can ask for video tutorials on any of the topic, exercise, tutorial, or concept. As well as, its complete image libraries and instruments enable you automate electrical engineering duties and save your effort and time significantly, thereby offering you extra time for innovation.
Nevertheless, with the introduction of AutoCAD Electrical, the possibilities of error have diminished significantly, thereby enabling you to design 2D industrial controls quicker and precisely. Furthermore, AutoCAD Electrical is used to automate varied management engineering duties equivalent to constructing circuits, numbering wires, making a invoice of supplies, and plenty of extra. Utilizing this textbook, the readers can study the appliance of fundamental instruments required for creating skilled electrical-control drawings with the assistance of AutoCAD Electrical.
Buy From Amazon. Related Results : autocad electrical pdf , autocad electrical tutorial pdf ,. Sign in. Save time with enhanced automation, allowing for automatic numbering of wires and generation of component tags. Simplify your workflow and save time by automatically generating and updating multiple customized reports. In addition to supporting the latest electrical standards, the Electrical toolset continues to provide the JIC and older IEC symbol libraries for legacy support.
Re-tag components, easily make changes to your file, and access simple export options. Simplify your electrical design with Circuit Builder. Access prepopulated data to build and annotate a sampling of motor control and power feed circuits. Save time with SQL catalog database support. When you generate a Bill of Materials in Autodesk Vault, the data from your AutoCAD Electrical drawings will be automatically added to the report, including the details in the catalog database.
Speed up your workflow by using a single data file to generate multiple drawings. Productivity data based on a series of studies commissioned by Autodesk to an outside consultant.
As with all performance tests, results may vary based on machine, operating system, filters, and even source material. While every effort has been made to make the tests as fair and objective as possible, your results may differ.
Product information and specifications are subject to change without notice. All rights reserved. Email is required Entered email is invalid.
Serial Number AutoCAD | PDF | Autodesk | Auto Cad.(PDF) AUTOCAD ELECTRICAL FOR ELECTRICAL CONTROL DESIGNERS | DO TUAN BANG –
Shared a tutorial on Youtube in case if it help anyone to use this awesome tool with newer Revit versions. Hi Ian, We do not support the app anymore. The code source is now available on Github. With access to the code, you can build the app for revit Hi, if any one upgraded for could you please send it or tell me the way??
I saw the code but couldn’t figure it out : it is much needed, what a loss :. Hola, ahora, ne es possible. Great tool! Sorry to see it go. Is anyone aware of a similar add-on since this is no longer supported? Hi, the plugin is amazing, but I have a dificulty. How can I define color transparency? The Mate Color overrides the lines for exemple: When I define a color by casework type, and I have 3 equals cabinets in a row, it overrides the lines that defines each one. With the transparency solution will resolve this problem and the drawings get much more beautiful.
Please review the new app description. But it’s not updated to version Everything else works fine for me. At least upto i’ve used it. We haven’t have the opportunity to fix it. It also is in practice. Just turn on the Interior Fill subcategory in the room subcategories and it will do the trick!
The add in is spectacular! Just have one comment. I want to select a category and than only apply a color splash to select family types. Is there a way to do this? Color Splasher uses the “override graphics in view” function of Revit. This doesn’t work for links. So it’s unlikely that a tool will support this any time soon. Thank you for your helpful app. But I have a small problem. When I use on 3d View, I lost my element boundary line, element become smoothly with the color.
Could you help me with this. Thank you. Hi, like mentioned in previous comments below from Glae Cordova, This is something that you can tweak.
We have that in our backlog to be fixed but I do not have any ETA for you right now. Hi, The latest version fixes your issue, it was due to a change in Revit API when they introduce the double hatch capability. Play around with that. Great for auditing walls, doors, etc! Saves so much time instead of creating hundreds of filters. This is great addin, great job! It would be really usefull to refine app with additional option to apply solid hatch surface pattern while overriding element graphics – therefore a result will be much better in case when material surface pattern is set to “none”.
Still being used over the years! Although now that I think about it, possible with Dynamo somehow using colour override RGB values, need to think about it Hi, The latest version fixes your issue, it was due to a change in Revit API when they introduced the double hatch capability.
Fantastic plugin! I have one question: how does this plugin work? There are no color filters or temporary overrides? Hi Andreas. Thank you for the great review! Hi Dawid, please note that a new version of the app has been published. This new version is compatible with Revit Hi Ben, sorry about the delay. Please note that a new version of the app has been published. Is this application no longer being maintained? I was hoping to see a Revit version Hi David, please note that a new version of the app has been published.
Hi Maria, please note that a new version of the app has been published. Very useful, however, if there is a way to not have to re apply if an object is changed or added it would be close to perfect. Hi Richard, please note that a new version of the app has been published. Hi Alex, this is a tool that allows you to graphically visualize and verify the information in a model. It filters, selects and colors elements based on the values of a defined parameter to let you visualise if there are errors or a lack of information.
User first selects the desired category, then selects a parameter and finally, sets colors for each value of this parameter. Importing a man-made Excel file will not work as Revit will only answer to a specific structure of data. Once the file has been exported, you can only modify existing data in the fields generated during the export. An update will also be released when Revit will be available. Thanks for the positive feedback, we’re glad that you like it! Really need this for You mentioned fall of for the new release.
Winter is just a few weeks away! Hi Brian, sorry for the late reply. Thank you for your feedback! Sure am missing this in – do not plan on updating?
Could we please see this shortly in – color splasher works much better and quicker than playing around with filters. I like to distinguish my wall types by coloring them. The features in Color Splasher are really easy to use. Can you give me a valid e-mail to contact you? I sent a mail to the support support bimone. Hi Noran, sorry for the delay. The support bimone. Here’s my answer: – We didn’t discuss about patterns while developping the app but I will check that with the DEV team.
Best regards Thank you for the good rating! Much appreciated! Hi, still no way to apply the addin to linked model elements??
This is a fantastic way to quickly do some QA. Color things by the parameter you want to check, or hand pick colors for some specific parameter values you want to highlight. Used in a 3d view with unrelated things hidden works great. Hi my name is Emily and I just wanted to send you a quick message here instead of calling you. I have found that the key to running a popular website is making sure the visitors you are getting are interested in your website topic.
There is a company that you can get keyword targeted traffic from and they let you try their service for free for 7 days. I managed to get over targeted visitors to day to my site. Color Splasher. Description The application historically developed by BIM One is no longer supported and is now available as open source on GitHub here:.